February 2012 14 – 199
8 Press the soft key COPY DIR. or COPY ABC -> XYZ.
8 Press the EXECUTE soft key and confirm further prompts. --> The directory with its entire contents
or the individual file is transferred from the USB flash drive to the control.
8 Press the WINDOW soft key (you may have to switch to next soft-key row). --> The split screen
display is closed.
8 Place the cursor on the USB device.
8 Press the soft key "Remove USB flash drive" before removing it. --> See ”Disconnecting the USB
flash drive” on page 14 – 195.
Reading out data
using TNCremoNT
Select the target drive and the target directory from the upper half of the screen display (contents
of laptop/PC).
8 Click the bar with the drive information. --> Its color changes, and two buttons appear at the right
side in the bar.
8 Click the Change folder/drive... button. --> A new window opens.
8 Select the drive and the folder. --> The path is displayed in the bar.
In the lower half of the screen (iTNC 530 HSCI contents), select the source drive and the source
directory:
8 Click the bar with the drive information. --> Its color changes, and two buttons appear at the right
side in the bar.
8 Click the Change folder/drive... button. --> A new window opens.
8 Select the drive and the folder. --> The path is displayed in the bar.
For the data to be read out, you can create a folder on your laptop with TNCremoNT. For this
purpose, click the icon Create folder or select File / Create folder ... from the menu.
For changing to the PLC: und SYS: control partitions, you are prompted the respective code
numbers.
To Next Page
Loading...
