February 2012 21 – 337
8 Press the SHOW ACTUAL VALUE soft key. --> The specifications of the selected motor are
displayed:
8 You can now move the cursor in the line of the highlighted motor and read all available data.
8 Press the END key to exit the motor table.
Especially spindle motors can be operated with wye or delta connection (depending on the
spindle speed).
The specifications of the spindle motors depend on the operating mode:
Mode 0 = wye operation
Mode 1 = delta operation
Place the highlight in the correct line!
The meaning of the selected column is displayed in the header (e.g. Line count of rotary
encoder).
To Next Page
Loading...
