29 – 530 HEIDENHAIN Service Manual iTNC 530 HSCI
Special case:
Firmware update
cannot be loaded
On some older HSCI components the firmware update cannot be loaded onto the machine in the field.
Example:
An up-to-date PLD-H 16-08-00 is to be replaced by an older PLD-H 16-08-00:
While booting, the control displays this window:
If this or a similar message appears, a firmware update cannot be performed for the older HSCI
device. --> Contact your OEM or a HEIDENHAIN service agency.
The message Exchange the peripheral device or similar messages indicating that a firmware
update could not be loaded are also entered in the log of the control.
To Next Page
Loading...
