endpoints of the quadrilateral warning zone to complete the zone
drawing.
NOTE
You can modify the drawn warning line through " Clear All"
and" Draw A Quadrilateral" buttons.
Steps 4: Click "Processing Method", set alarm linkage as required (Buzzer,
E-mail Notification, Channel Recording) and Trigger Alarm Output, as shown
in Figure 5-69
○
2 below.
Figure 5-69
○
2
Steps 5: Click "Apply" to save the setting.
The loitering function can detect the stay time of the target in the set area.
When the stay time exceeds the set time threshold, an alarm linkage will be
triggered
The specific operation steps are as follows:
To Next Page
Loading...