Steps 2: Select the configuration items that need to be restored to factory
settings.
Steps 3: Click "Apply→OK".
Restore Storage Default Param: Select / Cancel to restore all storage
configuration parameters to default values.
Restore Camera Default Param: Select / Cancel to restore all cameras
configuration parameters to default values.
Restore System Default Param: Select / Cancel to restore all system
configuration parameters to default values.
Restore Maintenance Default Param: Select / Cancel Resume
Maintenance all interface configuration parameters to the default
values.
Restore Factory Settings: Select / Cancel all NVR configuration
parameters to the default.
NOTE
After restoring the factory settings, the corresponding functions will be
restored to the factory settings. The user's existing configuration may be
lost. Please proceed with NOTE.
5.3.8.3 Network Information
Network traffic refers to the data traffic used by video files in a unit of
time.Through network traffic monitoring, you can view the real-time code
stream and code stream waveform changes of each channel in real time.
The specific operation steps are as follows:
Step 1: In the main menu, choose " →Network Traffic" to enter network
traffic interface, as shown in Figure 5-86 below.
To Next Page