6-34 below. Here you could set the duration of the buzzer alarm. The related
parameters are consistent with the local settings of the NVR.
Figure 6-34
6.5.4.6 Intelligent
Intelligent detection includes face detection, crossover detection, regional
intrusion detection, people stay and people gathering detection.
In the main interface, click "Configuration →System →Smart Event →Face"
to enter the Face detection setting interface, as shown in Figure 6-35 below.
Here you could set the alarm for face detection. The relevant parameters are
consistent with the local settings of the NVR.
Figure 6-35
In the main interface, click "Configuration →System →Smart Event →
Crossover" to enter the Crossover detection setting interface, as shown in
Figure 6-36 below. Here you could set the alarm for crossover detection. The
relevant parameters are consistent with the local settings of the NVR.
To Next Page
Loading...