installed into the enclosure, any unfinished rows must be completed with drive blanks. The image below details
the minimum required configuration for an HDD only configuration.
Figure 192: Minimum HDD Partial Population
Minimum HDD and Minimum SSD Partial Population:
The enclosure supports a minimum of 24 HDDs and one SSD for a partially populated enclosure. The enclosure
can support a minimum of one SSD with the remaining drive slots within that row being completed with drive
blanks. The enclosure does not support a mix of SAS and SATA drives. The image below details the minimum
required configuration for an HDD and SSD configuration.
184
5 System Management
User Guide 5.3 Partially Populated Enclosures
To Next Page
Loading...
Need help?
General
