HIKVISION AXHub - Page 26

You should select the Alarm Receiver Type as IP or Domain
name, and enter the IP/domain name, port number, account
code, meout, re-upload mes and heartbeat interval.
Figure 4-6 SIA-DCS
Note
Set the heartbeat interval with the range from 10 to
3888000 seconds.
-
EHome
You do not need to set the EHome protocol parameters.
Figure 4-7 EHome
-
*SIA-DCS or *ADM-CID
You should select the Alarm Receiver Type as IP or Domain
name, and enter the IP/domain name, port number, account
code, retry
meout period , aempts, heartbeat interval,
encrypon arithmec, password length and secret key.
18