EasyManuals Logo
Home>HIKVISION>Control Panel>AXHub

HIKVISION AXHub User Manual

HIKVISION AXHub
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Note
The buzzer beeps slowly 2 minutes before the auto arming
starts, and beeps rapidly 1 minute before the auto arming
starts.
Note
You can select to enable forced arming on the System
Opons page. While the funcon is enabled, the system will
be armed regardless of the fault.
Note
If the public paron is enabled, the paron 1 dose not
support auto arming.
Enable Auto Disarming
Enable the funcon and set the disarming start me. The
zone will be disarmed according to the congured me.
Note
The auto arming me and the auto disarming me cannot
be the same.
Note
If the public paron is enabled, the paron 1 dose not
support auto disarming.
Late to Disarm
Enable the funcon and set the me. If the alarm is
triggered aer the congured me, the person will be
considered as late.
Note
You should enable the Panel Management Nocaon
funcon in Communicaon Parameters → Event
Communicaon before enabling the Late to Disarm
funcon.
Weekend Excepon
Enable the funcon and the zone will not be armed in the
weekend.
Siren Delay Time (Perimeter Alarm)
If you have set the perimeter zone, you can set the delayed
me for the zone.
Note
The available me duraon range is from 0 s to 600 s.
Alarm Duraon
Set the me duraon of the alarm.
Note
The available me duraon range is from 1 s to 900 s.
5.
Click Save.
4.3.4 Video Management
31

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION AXHub and is the answer not in the manual?

HIKVISION AXHub Specifications

General IconGeneral
BrandHIKVISION
ModelAXHub
CategoryControl Panel
LanguageEnglish

Related product manuals