To Next Page

To Previous Page

Figure 4-39 Zone Seng Page

Set the following parameters as you desired.

Zone Type

Select a zone type from the zone type list.

If you select Delayed Zone, you should select an entry delay

(Entry Delay 1 or Entry Delay 2) on the pop-up page.

If you select Timeout Zone, you should select a

meout

value or tap Custom to set a custom value.

Zone Bypass

Enable the funcon and the zone will be bypassed. No alarm

will be received while the zone is bypassed.

Link Camera

You can link the zone to cameras. When an alarm is

triggered, you can monitor the zone via the linked cameras.

Stay/Away

If this

opon is Enabled the zone will be auto bypassed

when the alarm system is stay armed. To re-enable the zone

deselect the opon.

Chime

Enable the

funcon and the zone will be start audible alarm

when it is triggered.

Enable Silent Zone

Enable the funcon and no siren will be triggered if an event

or alarm occurs.

4.4.10 Set Arming/Disarming Schedule

Set the arming/disarming schedule to arm/disarm a parcular

zone automacally.

HIKVISION AXHub User Manual

Questions and Answers: