HIKVISION AXHub User Manual

On the device list page, tap the security control panel and then
log in to the device (if required) to enter the control panel page.
Tap → Paron Management and select a paron, or tap
on the Parion page to enter the Sengs page.
Enable the auto arm/disarm
funcon and set the auto arm me/
auto disarm me. You can also set the late to disarm me, entry
delay me, exit delay me, siren delay me, weekend excepon
and excepted holiday.
Figure 4-40 Arming or Disarming Schedule Page
Auto Arm
Enable the paron to automacally arm itself in a specic
me
point.
Auto Arm Time
Set the schedule for the paron to automacally arm itself.
Late to Disarm
Enable the device to push a nocaon to the phone or tablet
to remind the user to disarm the paron when the paron is
sll armed aer a specic me point.
Note
You should have enabled nocaon fucons on the Web
Client of the security control panel, or the nocaon will not
be pushed to the phone or tablet.
Late to Disarm Time
Set the me point menoned in Late to Disarm.
Weekend Excepon
If enabled, Auto Arm, Auto Disarm, and Late to Disarm are
disabled on the weekend.
Entry Delay 1
50

HIKVISION AXHub Specifications

General

Brand	HIKVISION
Model	AXHub
Category	Control Panel
Language	English