HIKVISION DS-2TD6267-75C4L/WY - Set Electric Current Limit; View Open Source Software License; Time and Date; Synchronize Time Manually

Firmware Directory Locate the directory which the upgrade le belongs to.
3.
Click Browse to select the upgrade le.
4.
Click Upgrade.
14.8 Set Electric Current Limit
This funcon can control the power supply current of the device.
Go to Conguraon → System → Maintenance → System Service , and select Electric Current
Limit type. You can limit the device current to 75% of full current or half the full current for power
saving control.
14.9 View Open Source
Soware License
Go to Conguraon → System → System Sengs → About , and click View Licenses.
14.10 Time and Date
You can congure me and date of the device by conguring me zone, me synchronizaon and
Daylight Saving Time (DST).
14.10.1 Synchronize Time Manually
Steps
1.
Go to
Conguraon → System → System Sengs → Time Sengs .
2.
Select Time Zone.
3.
Click Manual Time Sync..
4.
Choose one
me synchronizaon method.
-
Select Set Time, and manually input or select date and me from the pop-up calendar.
-
Check Sync. with computer
me to synchronize the me of the device with that of the local
PC.
5.
Click Save.
14.10.2 Set NTP Server
You can use NTP server when accurate and reliable
me source is required.
Before You Start
Set up a NTP server or obtain NTP server informaon.
Steps
1.
Go to
Conguraon → System → System Sengs → Time Sengs .
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
98