HIKVISION DS-2TD6267-75C4L/WY - Set Picture in Picture; VCA Rule Display Settings

11.9 Set Picture in Picture
You can overlay the images of two channels and view the image of two channels at the same me.
Steps
1.
Select a channel number.
2.
Select the picture in picture mode.
Overlap Mode Paral image of thermal channel is displayed on the full screen of opcal
channel. This mode is only supported in opcal channel.
Details Overlay
Mode
The device displays the details of opcal channel on thermal channel. This
mode is only supported in thermal channel.
3.
In Details Overlay Mode, set the Fusion Distance of the target. It is recommended to use the
default value.
4.
Click Save.
Note
Not all models support this funcon, take the actual product for reference.
11.10 VCA Rule Display Sengs
The VCA rule display refers to the funcon that you can customize the displayed overlay
informaon of the VCA rule, which includes the font size and line and frame color.
You can go to
Conguraon → Image → VCA Rule Display to select the desired font size, and set
the line and frame color.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
78