HIKVISION DS-2TD6267-75C4L/WY - Scene Mode; Image Adjustment; Image Adjustment (Thermal Channel)

11.5.1 Scene Mode
There are several sets of image parameters predened for dierent installaon environments.
Select a scene according to the actual
installaon environment to speed up the display sengs.
11.5.2 Image Adjustment
By adjusng the Brightness, Saturaon, Hue, Contrast and Sharpness, the image can be best
displayed.
Figure 11-1 Saturaon
11.5.3 Image Adjustment (Thermal Channel)
You can opmize the image display eect of thermal channel by seng background correcon and
manual correcon.
Background Correcon
Fully cover the lens with an object of uniform temperature in front of the lens, such as foam
board or paperboard. When you click DPC (Defecve Pixel Correcon), the device will take the
uniform object as the standard and
opmize the image once.
Manual Correcon
Click DPC (Defecve Pixel Correcon) to opmize the image once.
Note
It is a normal phenomenon that short video freezing might occur during the process of Background
Correcon and Manual Correcon.
Thermal AGC Mode
Choose the AGC mode according to dierent scenes to balance and improve the image quality.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
69