HIKVISION DS-2TD6267-75C4L/WY - Expert Mode

Figure 7-1 Set Rules
Stop Drawing Stop drawing one area.
Clear All Clear all the areas.
4.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
7.1.2 Expert Mode
You can congure the moon detecon parameters of day/night switch according to the actual
needs.
Steps
1.
Select expert mode in
Conguraon.
2.
Set parameters of expert mode.
Day/Night Switch
OFF: Day/Night switch is disabled.
Day/Night Auto-Switch: The system switches day/night mode
automacally according to
environment. It displays colored image at day and black and white image at night.
Day/Night Scheduled-Switch: The system switches day/night mode according to the schedule.
It switches to day mode during the set periods and switches to night mode during the other
periods.
Note
This funcon is not supported in the expert mode of thermal channel.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
36