HIKVISION DS-2TD6267-75C4L/WY - Lens Initialization; Track Manually; Auxiliary Focus; Quick Set Live View

10.1.9 Lens Inializaon
Lens inializaon is used on the device equipped with motorized lens. The funcon can reset lens
when long
me zoom or focus results in blurred image. This funcon varies according to dierent
models.
Manual Lens Inializaon
Click to operate lens inializaon.
Auto Lens Inializaon
Go to Conguraon → System → Maintenance → Lens Correcon to enable this funcon. You
can set the arming schedule, and the device will correct lens automacally during the
congured me periods.
10.1.10 Track Manually
In live view, manually select a target for the device to track.
Note
The funcon may not be supported by certain device models.
Steps
1.
Click on the toolbar of the live view page.
2.
Click a moving object in the live image.
The device tracks the target and keeps it in the center of live view image.
10.1.11 Auxiliary Focus
Click to realize automac focus. This funcon is subject to the actual device model.
10.1.12 Quick Set Live View
It oers a quick setup of PTZ, display sengs, OSD, and video/audio sengs on live view page.
Steps
1.
Click to show quick setup page.
2.
Set PTZ, display
sengs, OSD, and video/audio parameters.
-
For PTZ
sengs, see Lens Parameters Adjustment .
-
For display sengs, see Display Sengs .
-
For OSD
sengs, see OSD .
-
For audio and video sengs, see Video and Audio .
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
59