HIKVISION DS-2TD6267-75C4L/WY - Set FTP; Set Cloud Storage

Steps
1.
Go to NAS seng page: Conguraon → Storage → Storage Management → Net HDD .
2.
Click HDD No. Select Mounng Type and set parameters for the disk.
Server Address
The IP address of the network disk.
File Path
The saving path of network disk
les.
User Name and Password
The user name and password of the net HDD.
3.
Click Test to check whether the network disk is available.
4.
Click Save.
12.1.3 Set FTP
You can congure the FTP server to save images which are captured by events or a med snapshot
task.
Before You Start
Get the FTP server address rst.
Steps
1.
Go to Conguraon → Network → Advanced Sengs → FTP .
2.
Congure FTP sengs.
Server Address and Port
The FTP server address and corresponding port.
User Name and Password
The FTP user should have the permission to upload pictures.
If the FTP server supports picture uploading by anonymous users, you can check Anonymous
to hide your device
informaon during uploading.
Directory Structure
The saving path of snapshots in the FTP server.
3.
Click Upload Picture to enable uploading snapshots to the FTP server.
4.
Click Test to verify the FTP server.
5.
Click Save.
12.1.4 Set Cloud Storage
It helps to upload the captured pictures and data to the cloud. The plaorm requests picture
directly from the cloud for picture and analysis. The
funcon is only supported by certain models.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
80