HIKVISION DS-2TD6267-75C4L/WY - Page 23

Add Original Data on Stream
Add and save original raw data to stream. The funcon requires higher network bandwidth.
Data Refresh Interval
It means the refresh interval of original data.
Display Pixel-to-Pixel Thermometry Data on Stream
Add and save real-me pixel-to-pixel thermometry data to stream. The funcon requires
higher network bandwidth.
The
funcon varies according to dierent camera models.
Pixel-to-Pixel Thermometry Data Refresh Interval
It means the refresh interval of thermometry data.
Unit
Display temperature with Degree Celsius (°C)/Degree Fahrenheit (°F)/Degree Kelvin (K).
Temperature Range
Select the temperature measurement range. The device can adjust the temperature range
automacally if you select Auto.
Atmospheric Temperature
Set the atmospheric temperature.
Atmospheric Humidity
Set the atmospheric humidity.
Atmospheric Transmissivity
Set the atmospheric transmissivity from 0 to 1.
Distance Mode
Select the distance mode for temperature measurement. Fixed Distance and
Self-Adapon
are selectable.
Version
View the version of current algorithm.
Calibraon File Version
View the version of calibraon le.
Alarm Interval
Set the alarm interval between two alarms.
Reect Light Filter
Enable these funcons if there is strong reected light from sun, or it may cause false alarm.
The lter sensivity can be adjusted.
Check Display Filtering Status, and the OSD will be displayed when the funcon is enabled.
Click Restart to restart the algorithm library of
reect light lter.
The Reect Light Filter funcon varies according to dierent camera models.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
8