HIKVISION DS-2TD6267-75C4L/WY - Page 34

Adjust Sensivity during Patrol. The bigger the value is, the more easily the re source can
be detected, and the false rate is higher.
by Mulple Frame
The system stops to check the
doubul re source aer rst detecon. It alarms with high
accuracy aer double checking the re source on mulple frames, thus the detecon speed
is slow.
As to the
detecon sensivity of this mode, adjust the Sensivity during Patrol for the rst
detecon and Vericaon Sensivity for the double check.
In this
detecon mode, Smoke Auxiliary Detecon can also be used to help verify the re
source.
Check Cancel Repeated Alarm and the device alarms only one me if re source detected in
the same place during one day.
Smoke Auxiliary
Detecon
The device conducts smoke detecon to verify the re source. It can be congured when the
detecon mode is selected as by Mulple Frame.
Cancel Repeated Alarm
Alarm only one
me if re source detected in the same place. It can be congured when the
detecon mode is selected as by Mulple Frame.
Sensivity
The sensivity of re detecon. The bigger the value is, more easily the re source can be
detected, and the false rate is higher.
Hold-and-Alarm Mode
Auto and Manual are selectable. The system will stop when it detects the
re source. You can
set the duraon while it keeps sll.
Auto
You can set the dwell me. During the dwell me the camera stays sll where it detects the
re source when performing auto scan, patrol, paern, scheduled task, and park acon.
Manual
The device stays
sll where it detects the re source, unl you manually
Fire Source Zoom
Rao
Auto
The
opcal channel changes its zoom rao unl the thermal channel has the same eld of
view.
Manual
You can set the opcal zoom rao.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
19