HIKVISION DS-K1T341A Series

Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
3. In the Access Con
trol area, click
to select access group(s) for the person.
Note
For details, refer to Se
t Access Group to Assign Access Authorizaon to Persons .
Figure 9-5 Congure Access Control Informaon
4. Se
t a unique PIN code for the person which can be used for access authencaon.
-
Manually en
ter a PIN code containing 4 to 8 digits.
Note
Persons' PIN codes cannot be repeated.
-
Click Gener
ate to randomly generate an unrepeated PIN code of 6 digits.
Note
If there are repeated PIN codes, a prompt will pop up on the client. The admin can generate
a ne
w PIN code to replace the repeated PIN code and nofy related persons.
5. Check the per
son's operaon permissions.
Super User
If the person is set as a super user, he/she will have authorizaon to access all the doors/
oor
s and will be exempted from remaining closed restricons, all an-passback rules, and
rst person authorizaon.
Extended Door Open Time
Use this
funcon for persons with reduced mobility. When accessing the door, the person
will have more me than others to pass through doors.
For details about seng the door's open duraon, refer to Congure Parameters for Door/
Elevator .
Add to Blocklist
Add the person to the blocklist and when the person tries to access doors/oors, an event
will be trig
gered and sent to the client to nofy the security personnel.
DS-K1T341A Series Face Recognion Terminal User Manual
107