HIKVISION DS-K1T341A Series User Manual

Get card reader type and descripon. They are read-only.
Fingerprint Capacity
View the maximum number of available ngerprints.
Exisng Fingerprint Number
View the number of existed ngerprints in the device.
Advanced
Enable Card Reader
Enable the funcon and e device can be used as an card reader.
OK LED Polarity/Error LED Polarity/Buzzer Polarity
Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the
card reader parameters. Generally, adopts the default sengs.
Max. Interval When Entering PWD
When you inpung the password on the card reader, if the interval between pressing two
digits is larger than the set value, the digits you pressed before will be cleared
automacally.
Tampering Detecon
Enable the an-tamper detecon for the card reader.
Max. Times of Card Failure
Set the max. failure aempts of reading card.
Fing
erprint Recognion Level
Select the ngerprint
recognion level in the drop-down list.
Face 1:N Mathcing Threshold
Set the matching security level when authencang via 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Face Recognion Interval
The
me interval between two connuous face recognions when authencang. By
default, it is 2s.
Face
An-spoong
Enable or disable the face an-spoong funcon. If enabling the funcon, the device can
recognize whether the person is a live one or not.
Face 1:1 Matching Threshold
Set the matching threshold when authencang via 1:1 matching mode. The larger the
value, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Applic
aon Mode
DS-K1T341A Series Face Recognion Terminal User Manual
124

HIKVISION DS-K1T341A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T341A Series
Category	Touch terminals
Language	English