HIKVISION DS-K1T341A Series

Figure 9-17 Add Timetable
3. Cr
eate a name for the metable.
Note
You can click the color icon beside the name to customize the color for the valid metable on
the me bar in the Conguraon Result area.
4. Select the metable type as general.
5. Select calculaon method.
Fir
st In & Last Out
The rst check-in me is recorded as start work me and the last check-out me is recorded
as the end-w
ork me.
Each Check-In/Out
Each check-in me and check-out me is valid and the sum of all periods between adjacent
check-in and check-out me will be recorded as the valid working duraon.
You need to set V
alid Authencaon Interval for this calculaon method. For example, if the
interval between card swiping of the same card is less than the set value, the card swiping is
invalid.
6. Oponal: Set Enable T&A Status switch to on to calculate according to aendance status of the
device.
DS-K1T341A Series Face Recognion Terminal User Manual
158