HIKVISION DS-K1T341A Series

Note
This funcon should be supported by the device.
7. Oponal: Enable Calcula
te Break Time into Aended Duraon.
Note
When enabled, break me will be calculated into the overall aendance duraon. That is, the
actual aendance
duraon equals to the overall aendance duraon (includes break me).
8. Se
t the related aendance me parameters as the following:
Start/End-Work Time
Set the start-work me and end-work-me.
Valid Check-in/out Time
On the me bar, adjust the yellow bar to set the metable during which the check-in or
check-out is valid.
Calculated as
Set the duraon calculated as the actual work duraon.
Late/Early Leave Allowable
Set the
metable for late or early leave.
9. Set absence related parameters.
Check-In, Late for
You can set the late me
duraon for the employee who has checked in but is late for work.
If the employee exceeds the required me period, his/her aendance data will be marked as
absent.
Check-Out, Early Leave for
You can set the early leave me duraon for the employee who checks out earlier than the
normal lea
ve me, and his/her aendance data will be marked as absent.
No Check-in
If the employee does not check in, his/her aendance data may be marked as absent or late.
No Check
-Out
If the employee does not check out, his/her aendance data may be marked as absent or
early leave.
10. Click Save to add the metable.
11. Oponal: P
erform one or more following operaons aer adding metable.
Edit Timetable Select a metable from the list to edit related informaon.
Delete Timetable Select a metable from the list and click Dele
te to delete it.
DS-K1T341A Series Face
Recognion Terminal User Manual
159