Hioki 3554 - Holding the Display; Holding; Cancelling a Hold; Holding Using the EXT.HOLD;MEMO Terminal

Industrial Batteries & Energy Storage
1300 734 253
sales@regalelectro.com.au
www.regalelectro.com.au
3.4 Holding the Display
3.4.1 Holding
Holding the measurement values displayed on screen.
Press key. The icons will be displayed, and the measurement values will be held:
3.4.2 Cancelling a Hold
Press key again to cancel the hold.
Holding cannot be conducted when the following values are displayed: ‘- - - -‘
Changing configuration conditions will cancel the hold.
Turning off the power will cancel the hold.
3.4.3 Holding Using the EXT.HOLD/MEMO Terminal
The EXT.HOLD/MEMO terminal can be used for the same purposes as key. This requires the
optional 9466 Remote Control Switch.
1. Disconnect the test lead from the battery subject to measurement.
2. Insert the mini-plug of the 9466 Remote Control Switch into the EXT.HOLD/MEMO terminal.
3. Press the PRESS button on the 9466 to hold the measurement values.
4. To cancel the hold, press the PRESS button on the 9466 switch or press key on the
instrument.
Holding cannot be conducted when the following values are displayed: ‘- - - -‘
Holding cannot be conducted when the
following values are displayed:
‘- - - -‘