The latest version of Application Software for 3554 can be downloaded from the Hioki
Website. URL: http://www.hioki.co.jp/
7.2.2 Uninstalling (Removing) the Application
If Application Software for 3554 is active, be sure to close the application before uninstalling it.
1. Select the [Add or Remove Programs] in the Control Panel, under the Start menu.
2. Select [Application Software for 3554], and then click [Remove].
On Windows98SE or Windows Me, select the [Add or Remove Programs] in the Control
Panel under settings on the Start Menu.
7.3 Installing the USB Driver
Do not plug in or unplug the USB cable while the instrument is operating.
After installing Application Software for 3554, the USB driver can be installed by connecting the
instrument with the computer using the USB cable. (Once Application Software for 3554 has been
installed, there is no need to reinsert the CD into the computer’s CD-ROM drive to install the driver).
1. Install the computer software.
2. Turn the power on to the instrument.
3. Using the enclosed USB cable, connect the instrument to the computer to which the driver
will be installed.
To Next Page
Loading...
