10.6 Test Lead Options
10.6.1 Model 9460 Clip Type Lead with Temperature Sensor
Resistance, voltage and temperature can be measured simultaneously.
10.6.2 Model 9466 Remote Control Switch
By attaching this switch to the test lead, values can be held during measurement.
10.6.3 Model 9467 Large Clip Type Lead
These can be clipped to samples in relatively thick bar form. Four-terminal measurement can be
conducted just by clipping these to the subject.
Distance between the split and the probe: approx. 250mm
Distance between the connector and the split: approx. 850mm
Maximum clip diameter: approx. 29mm
To Next Page
Loading...
