Industrial Batteries & Energy Storage
sales@regalelectro.com.au
Safety Information
This instrument is designed to comply with IEC 61010 Safety Standards, and has been
thoroughly tested for safety prior to shipment. However, mishandling during use could result in
injury or death, as well as damage to the instrument. Be certain that you understand the instructions
and precautions in the manual before use. We disclaim any responsibility for accidents or injuries
not resulting directly from instrument defects.
Safety Symbols
This manual contains information and warnings essential for safe operation of the instrument and
for maintaining it in safe operating condition. Before using it, be sure to carefully read the following
safety precautions.
In the manual, the symbol indicates particularly important information that the user
should read before using the instrument.
The symbol printed on the instrument indicates that the user should refer to a
corresponding topic in the manual before using the relevant function.
Indicates DC (Direct Current).
Indicates a grounding terminal.
The following symbols in this manual indicate the relative importance of cautions and warnings.
Indicates that incorrect operation presents an extreme hazard that could result in
serious injury or death to the user.
Indicates that incorrect operation presents a significant hazard that could result
in serious injury or death to the user.
Indicates that incorrect operation presents a possibility of injury to the user or
damage to the instrument.
Indicates advisory items related to performance or correct operation of the
instrument.
Accuracy
We define measurement tolerances in terms of f.s. (full scale), rdg. (reading) and dgt. (digit) values,
with the following meanings:
To Next Page
Loading...
