Hioki 3554 - 3.2 Setting the Measurement Range

Industrial Batteries & Energy Storage
1300 734 253
sales@regalelectro.com.au
www.regalelectro.com.au
2. If you want to save the data under a different number
than the memory no. displayed, use the keys to
change the value.
After approx. one second passes with no settings made,
the settings displayed will be entered and the instrument
will return to the measurement screen.
The settings can also be finalised by pressing key.
This operation can be used at any time while the memory
feature is in effect.
3. Use key to hold measured values.
4. Use key to save measured values.
Measured values will be saved to the memory no.
selected.
5. When saving is complete, the next memory no. for saving
data will be displayed.
5.2.2 Saving Using the EXT.HOLD/MEMO Terminal
The EXT.HOLD/MEMO terminal can be used for the same purposes as key. This requires the
optional 9466 Remote Control Switch.
To avoid damage to the instrument, do not enter voltage to the EXT.HOLD/MEMO
terminal.
1. Disconnect the test lead from the battery subject to measurement.
2. Insert the mini-plug of the 9466 Remote Control Switch into the EXT.HOLD/MEMO terminal.
When ‘- -.- -‘ is displayed, values
cannot be held.