Industrial Batteries & Energy Storage
sales@regalelectro.com.au
2. After tables of permissible value transfer is complete, click [OK].
Transfer takes approx. six seconds.
Do not turn off the power to the instrument or disconnect the USB cable during
transfer. Doing so will damage the transfer of tables of permissible values.
The transfer time given is an approximation. The actual time needed may vary
depending on the processing speed of the computer used.
7.4.7 Reading Data from the 3554’s Internal Memory
The application can be used to read measurement data saved to the instrument’s internal memory.
1. Click [Read/Delete Data] on the initialisation screen.
2. Click [Read Data].
3. Click the numbers of the unit to read.
Click [ALL UNITs] to read all units.
If no data has been saved to the instrument’s internal memory, the unit numbers will be
covered in a mesh-like pattern and will not be available for choosing.
To Next Page
Loading...
