Industrial Batteries & Energy Storage
sales@regalelectro.com.au
When the resistance upper limit no.1 and no.2 are set at the same value, the boundary
conditions will be as shown below:
Resistance
upper limit
no.1
Resistance
upper limit
no.2
4.4 Setting the Comparator Buzzer
When using the comparator feature, the buzzer can be set to sound in accordance with judgement
results. The following conditions can be set. The initial configuration is ‘warn/fail (on)’.
No buzzer sounds regardless of the results of judgement.
The buzzer sounds when the results of judgement are ‘pass’.
The buzzer sounds when the results of judgement are ‘warning’ or fail’.
The sound emitted when pressing the keys cannot be changed.
To Next Page
Loading...
