Hioki 3554 - Error Display

Industrial Batteries & Energy Storage
1300 734 253
sales@regalelectro.com.au
www.regalelectro.com.au
- If not, select an appropriate range using the range key.
The Ω or V keys have no effect
Is the comparator feature in effect?
- These keys cannot be operated when the comparator
feature is in effect.
The MEMO keys have no
effect
Has the data been held?
- If not, use the HOLD key to hold the data.
No temperature displayed on
screen when using the 9460
Clip Type Lead with
Temperature Sensor
Has the 9460 Clip Type Lead with Temperature Sensor been
connected correctly?
- If not, connect it correctly.
Nothing displayed on screen
even after pressing READ key
This key cannot be used when no data has been saved.
Unusual comparator results
Have comparator permissible values been set incorrectly?
- If so, set them correctly.
9.2 Error Display
Conduct the following checks when an error message has been displayed on screen.
Error Message
Details
Response
Err
Zero-adjust failure
Ensure the probe is connected correctly and
conduct the zero-adjustment again.
no AdJ
Irregularity in adjustment data
Repairs required.
Contact Regal Electro.
Er10
Er11
Er12
Er20
Er21
Er22
Er23
Er24
Internal variable error