Industrial Batteries & Energy Storage
sales@regalelectro.com.au
Press key to check the date and time of saving (which will be displayed while the
key is de-pressed).
The comparator results for the data being read will also be displayed.
Numbers to which no data is saved cannot be selected.
If no data has been saved, ā- - - -ā will be displayed in the space for the memory no.
and the display will return to the measurement screen.
For data measured using the optional 9460 Clip Type Lead with Temperature Sensor
with temperature sensor, the temperature will also be displayed.
5.5 Deleting Saved Data
Saved measured values can be deleted as described below.
5.5.1 Deleting a Single Data Set
1. Press key.
This will display the reading screen.
2. Press keys to select the memory no.
Press keys to select digits.
3. Press key.
If there is no activity for approx. three seconds, the reading
screen will be displayed.
4. Press key to save the settings.
Data stored to the selected memory no. will be deleted.
To Next Page
Loading...
