3. Click on the arrows to set the current date and time (year, month, day, hour and minute
values), and then click [Set].
The current data and time values of the computer’s clock will be displayed by default. If
these are correct, simply click [Set] without changing them.
The clock settings will be finalised and transmitted to the 3554 instrument.
If you leave the clock setting screen by clicking [Back] without clicking [Set], the clock
settings will not be saved.
7.4.3 Preparing a New Table of Permissible Values
Up to 200 tables of comparator permissible values can be prepared.
1. Click [SET COMP/Clock] on the initialisation screen.
2. Click [COMP Table].
To Next Page
Loading...
