Large memory capacity
Combining currently measured values (resistance, voltage, temperature and comparator
measurement results) into a set, this instrument can store up to 4800 sets of data. It can be
used to measure up to 12 sets of 400 cell cubicles.
Auto-memory feature
Enabling this function results in measurement data being stored to the instrument’s internal
memory automatically, the instant it is held. This increases operational efficiency.
PC Interface
Measurement data can be loaded onto a computer.
Compact size
With a compact size with width and length approximately equivalent to the dimensions of an
A5-sized sheet of paper, this instrument is highly portable. Designed to have a weight of only
about 790g, it can be used for measurement over a long period of time without tiring the
user.
Model 9772 Pin Type Lead (optional)
Using the optional 9772 Pin Type Lead – with a pin point designed to fit in holes only 5mm in
diameter – makes measurement possible without removing terminal covers. Since the pin
can be inserted diagonally in hard-to-reach spots, it also makes measurement possible in
virtually any location.
A remote control switch for storing measurement values
Using the optional 9466 Remote Control Switch makes it possible to store and load
measurement values through a simple press of a button. This is useful for cases when both
of the operator’s hands are occupied.
1.5 Names and Functions of Parts
To Next Page
Loading...
