Industrial Batteries & Energy Storage
sales@regalelectro.com.au
When connected to a computer, using the USB cable, the instrument will shift to PC
mode and cease measurement operations.
Power to the internal measurement circuitry will be turned off, and the instrument
will shift to low power mode.
1. The APS feature is disabled while the instrument is in PC mode.
7.4.2 Starting the Software
1. Double-click on the icon on the computer’s desktop.
The software’s initialisation screen will appear.
2. When the following message has been displayed, check the USB cable connection or the
power supply and then click [OK].
If the USB cable is not connected, communication attempts will result in errors.
7.4.2 Clock-Setting
1. Click [SET COMP/Clock] on the initialisation screen.
2. Click [Set Clock].
To Next Page
Loading...
