Hioki 3554 - Chapter 2 Measurement Preparations

Industrial Batteries & Energy Storage
1300 734 253
sales@regalelectro.com.au
www.regalelectro.com.au
3.6 Battery Measurement
For determining battery wear, first measure the internal resistance in a new or good battery, and
then set values for judging battery wear.
1. Configure the range and conduct the zero-adjust operation.
2. Connect the test lead to the battery.
3. Read the measurement values.
4. Hold the measurement values by pressing key or the PRESS button on the remote
control switch.
5. Use the measurement values to judge battery wear.