Industrial Batteries & Energy Storage
sales@regalelectro.com.au
Used for turning the comparator feature on or off and configuring thresholds and other
values.
Used for turning the auto-hold and auto-memory features on or off.
Used for displaying the current date and time. Press this key for at least two seconds to
set the clock.
Used for selecting configuration settings and changing their values.
Used for storing displayed values to memory.
Used for setting configuration values.
Used for holding or cancelling the displayed values.
Used for recalling stored measurement values.
Used for deleting stored measurement values.
Used for implementing the zero-adjust feature.
Used for setting the number of measurements used in averaging.
Press this key once to display the current setting.
Keep the key pressed to switch settings through the cycle shown below.
OFF 4 8 16
Used for switching the resistance range.
Press this key once to display the current range.
Keep the key pressed to switch settings through the cycle shown below.
3.000mΩ 30.00mΩ 300.0mΩ 3.000Ω
Used for switching the voltage range.
Press this key once to display the current range.
Keep the key pressed to switch settings through the cycle shown below.
6.000V 60.00V
To Next Page
Loading...
