Industrial Batteries & Energy Storage
sales@regalelectro.com.au
Displayed when the zero-adjust feature is enabled.
Displayed when the auto-hold feature is enabled.
Displayed when the auto-memory feature is enabled.
Displayed when the comparator button is turned on.
Displayed when the auto-power-save feature is enabled.
Indicates the remaining battery power.
Displayed when the averaging feature is enabled.
Displayed when showing or setting the date and time.
Displayed when measurement values have been held.
Displayed when the memory feature is turned on.
Ordinarily, it shows the next number to be stored.
Displayed when recalling data from memory.
Displayed when setting the comparator.
Displayed when the memory number selected is already in use.
Displayed when configuring the settings for various features.
Displayed when setting comparator threshold values.
Displayed when the comparator feature is enabled.
Displayed when the battery can be used.
Displayed when the battery is wearing out.
Displayed when the battery has worn out.
To Next Page
Loading...
