Industrial Batteries & Energy Storage
sales@regalelectro.com.au
1. Press key to select resistance range.
Press key to select voltage range. (The position of the
decimal point will move.)
2. Press key to save the settings.
Resistance upper limit no.1 is flashing, and icon is
displayed.
Setting Resistance Permissible Values
1. Press keys to set the values of resistance upper
limit no.1.
Press keys to select digits.
2. Press key to save the settings.
Resistance upper limit no.2 and icon is flashing.
3. Press keys to set the values of resistance upper
limit no.2.
Press keys to select digits.
4. Press key to save the settings.
Voltage lower limit and icon is flashing.
To Next Page
Loading...
