24
Part Names and Functions
Measurement terminals
11 22 33
11
Current measurement terminal (A terminal).
The red test lead is connected.
Setting the rotary switch to the current measurement opens the shutter.
22
Commonly used for each measurement.
Hereafter referred to as “COM terminal”.
The black test lead is connected.
33
Used for voltage measurement, resistance measurement, continuity
check, diode test, electrostatic capacity measurement, or clamp current
measurement.
Hereafter referred to as “V terminal”.
The red test lead is connected.
Setting the rotary switch to any of the above measurements closes the
current measurement terminal.
Be sure to carefully read the following precautions for the terminals with the
marking.
• “Precautions during measurement” (p. 16)
• “6.4 Fuse Replacement” (p. 136)
To Next Page
Loading...
