Diagnostics
[ Diagnostics > Status Configuration > Security Status ]
239
RM GUI GRS
Release
8.0
09/2019
Table
Password default settings unchanged
Activates/deactivates the monitoring of the password for the locally set up user accounts
user
and
admin
.
Possible values:
marked
(default setting)
Monitoring is active.
If the password is set to the default setting for the
user
or
admin
user accounts, then in the
Security status
frame, the value changes to
error
.
unmarked
Monitoring is inactive.
You set the password in the
Device Security > User Management
dialog.
Min. password length < 8
Activates/deactivates the monitoring of the
Min. password length
policy.
Possible values:
marked
(default setting)
Monitoring is active.
If the value for the
Min. password length
policy is less than
8
, then in the
Security status
frame, the
value changes to
error
.
unmarked
Monitoring is inactive.
You specify the
Min. password length
policy in the
Device Security > User Management
dialog in the
Configuration
frame.
Password policy settings deactivated
Activates/deactivates the monitoring of the Password policies settings.
Possible values:
marked
(default setting)
Monitoring is active.
If the value for at least one of the following policies is less than
1
, then in the
Security status
frame,
the value changes to
error
.
–
Upper-case characters (min.)
–
Lower-case characters (min.)
–
Digits (min.)
–
Special characters (min.)
unmarked
Monitoring is inactive.
You specify the policy settings in the
Device Security > User Management
dialog in the
Password policy
frame.
User account password policy check deactivated
Activates/deactivates the monitoring of the
Policy check
function.
To Next Page
Loading...
