Diagnostics
[ Diagnostics > Status Configuration > Security Status ]
240
RM GUI GRS
Release
8.0
09/2019
Possible values:
marked
Monitoring is active.
If the
Policy check
function is inactive for at least 1 user account, then in the
Security status
frame,
the value changes to
error
.
unmarked
(default setting)
Monitoring is inactive.
You activate the
Policy check
function in the
Device Security > User Management
dialog.
Telnet server active
Activates/deactivates the monitoring of the Telnet server.
Possible values:
marked
(default setting)
Monitoring is active.
If you enable the Telnet server, then in the
Security status
frame, the value changes to
error
.
unmarked
Monitoring is inactive.
You enable/disable the Telnet server in the
Device Security > Management Access > Server
dialog,
Telnet
tab.
HTTP server active
Activates/deactivates the monitoring of the HTTP server.
Possible values:
marked
(default setting)
Monitoring is active.
If you enable the HTTP server, then in the
Security status
frame, the value changes to
error
.
unmarked
Monitoring is inactive.
You enable/disable the HTTP server in the
Device Security > Management Access > Server
dialog,
HTTP
tab.
SNMP unencrypted
Activates/deactivates the monitoring of the SNMP server.
To Next Page
Loading...
