Diagnostics
[ Diagnostics > Ports > Port Monitor ]
274
RM GUI GRS
Release
8.0
09/2019
Table
Port
Displays the port number.
Link flap on
Activates/deactivates the monitoring of link flaps on the port.
Possible values:
marked
Monitoring is active.
– The
Port Monitor
function monitors link flaps on the port.
– If the device detects too many link flaps, then the device executes the action specified in the
Action
column.
– On the
Link flap
tab, specify the parameters to be monitored.
unmarked
(default setting)
Monitoring is inactive.
CRC/Fragments on
Activates/deactivates the monitoring of CRC/fragment errors on the port.
Possible values:
marked
Monitoring is active.
– The
Port Monitor
function monitors CRC/fragment errors on the port.
– If the device detects too many CRC/fragment errors, then the device executes the action
specified in the
Action
column.
– On the
CRC/Fragments
tab, specify the parameters to be monitored.
unmarked
(default setting)
Monitoring is inactive.
Duplex mismatch detection active
Activates/deactivates the monitoring of duplex mismatches on the port.
Possible values:
marked
Monitoring is active.
– The
Port Monitor
function monitors duplex mismatches on the port.
– If the device detects a duplex mismatch, then the device executes the action specified in the
Action
column.
unmarked
(default setting)
Monitoring is inactive.
Overload detection on
Activates/deactivates the overload detection on the port.
To Next Page
Loading...
