Figure 4-28 Connecting to FC switch module
5. Enter admin as login name, and then press Enter key.
6. Enter password as password, and then press Enter key.
7. Skip from this step 7 to step 12 when the switch operation mode of failed
FC switch was Native.
Enter switchdisable, and then press Enter key.
Enter ag --modeenable, and then press Enter key.
Enter y when "Do you want to continue? (yes, y, no, n): [no]" is
indicated, and then press Enter key.
4-28
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
