22. Move cursor onto OK in Power Off ? dialog box, and then press Enter.
Confirm that the CBTP finishes and PWR LED on the server blade is
blinking
Reconfirming the server model and firmware versions
1. Depending on the server model and firmware versions, select one of the
following procedures.
a. The server model is CB 520H B3/B4 or CB 520X B1/B2/B3:
Go to
Rebooting the server before restoring FCoE settings on page
7-94.
b. The server model is CB 520H B2
7-80
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
