No. Name State Description
Amber-Blink Blink slowly: The port is disabled.
Blink rapidly: The port fails.
6 FC port status LED Green-On FC port online.
Green Blink Blink slowly: The FC port is online but
segmented
Blink rapidly: The port is diagnosed with
the internal loop-back.
7 USB port - Port for USB memory devices.
8 Management LAN port - LAN for managing fibre channel switch
modules. This LAN port is disabled at the
shipment.
9 Management LAN port
status LED1
Amber-On LAN interface online.
10 Management LAN port
status LED2
Green-On 100 Mbps full duplex.
Brocade 16Gb fibre channel switch module/16Gb fibre channel
switch module2
Figure 1-46 16Gb Fibre Channel switch module/16Gb Fibre Channel switch
module2
Table 1-38 LEDs and connectors on Fibre Channel switch module
No. Name State Description
1 Identify LED (LOCID) Blue-On The switch module is identified
Off The switch module is not identified
2 Power LED (PWR) Green-On Power-On and normal operation.
Off The power fails or no power supplied.
3 Status LED Green-On Normal operation.
Green-Blink During power-on diagnosis or booting
software.
Amber-Blink The over temperature threshold or any
warning conditions.
Introduction
1-35
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
