Figure 4-41 Editing NTP
Server blade
To identify TOD;
1. [For CB 520A A1, CB 520H A1/B1/B2/B3/B4, CB 540A A1/B1, and Non-
SMP CB 520X B1/B2/B3]
Select Resources tab and select Modules > All Modules > Server
Blades > a target module that should identify TOD.
[For SMP CB 520X B1/B2/B3]
Select Resources tab and select Modules > All Modules > Server
Blades > Sever Blade n of SMP configuration > a target module
that should identify TOD
2. Select BMC tab.
3. Check and record the some information for maintenance.
Figure 4-42 Identifying TOD clock information in BMC
Common process for replacement
4-47
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
