Hitachi CB 520H B1 - Management Module

LID: OFF
1. Select Condition tab, and then click LID OFF.
2. The confirmation dialog box appears. Click OK.
Figure 4-5 LID on/off for server blade
Management module
LID ON
1. Select Resources tab and select Modules > All Modules >
Management Modules > a target module that you should replace.
2. Select Condition tab, and then click LID ON.
3. The confirmation dialog box appears. Click OK.
LID: OFF
1. Select Condition tab, and then click LID OFF.
2. The confirmation dialog box appears. Click OK.
4-8
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual