Figure 7-5 Powering on the server blade
Restoring the parameters of 16 Gb FC mezzanine card on CB 520H B2
To restore the parameters of 16 Gb FC mezzanine card on CB 520X B1/B2/B3
or CB 520H B3/B4, go to
Restoring parameter of FC mezzanine card on CB
520X B1/B2/B3, CB 520H B3/B4 on page 7-32.
1. Press Esc in System Configuration and Boot Management window.
2. Press Y when Do you want exit Setup Utility is prompted.
3. Confirm BIOS version, and then press Ctrl + E key in the following
prompt.
Configuring Emulex mezzanine card
7-45
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
