9. Enter ftp < IP Address >, and then press Enter key.
IP Address : IP Address of console PC
10. Enter upload, and then press Enter key.
11. Enter binary, and then press Enter key.
12. Enter get < new firmware file name >, and then press Enter key.
13. The following message is displayed. Confirm "Transfer complete"
message.
14. Enter bye, and then press Enter key.
15. Enter ppupdate < new firmware file name >, and then press Enter
key.
16. The following message is displayed. Confirm the new firmware version.
Updating firmware
9-7
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
